Preparation and dye adsorption properties of activated carbon/clay/sodium alginate composite hydrogel membranes.

A hydrogel membrane was prepared using activated carbon and sodium dodecyl sulphate modified montmorillonite clay incorporated into sodium alginate polymer. The activated carbon was prepared from a locally available susbine plant. The physiochemical characteristics of the synthesized hydrogel membrane were investigated using FTIR, SEM, EDX, and TGA techniques. The performance of the membrane was evaluated as an adsorbent by methyl red adsorption from water. The adsorption behavior of the hydrogel membrane was investigated under varying conditions of pH (2-10), membrane dose (0.0025-0.015 mg g-1), equilibrium adsorption time (30-360 minutes), solution temperature (25-45 °C) and dye concentration (100-500 mg L-1). The maximum adsorption capacity of the hydrogel membrane was 248.13 mg g-1. The kinetics of methyl red adsorption on hydrogel membrane best followed the pseudo-second order (PSO). The equilibrium adsorption results suggested that it obeyed the Freundlich isotherm very closely (R2 = 0.994). The thermodynamics of methyl red adsorption on the hydrogel membrane revealed that the adsorption was spontaneous (ΔS° = 16.15 kJ K-1 mol-1), favorable (ΔG° = -3.51 kJ mol-1), and endothermic (ΔH° = -1.48 kJ mol-1) in nature. These investigations suggested that the fabricated hydrogel membrane could be suitably used for methyl red adsorption from the solution.

Synthesis, Characterization, and Adsorptive Characteristics of Radiation-Grafted Glycidyl Methacrylate Bamboo Fiber Composites.

In the present study, a biosorbent was prepared through the radiation-induced graft polymerization (RIGP) technique by using a glycidyl methacrylate (GMA) monomer. Functionalized bamboo materials were used for grafting. The grafting percentage (G %) of GMA on bamboo fibers was assessed based on the optimization of the absorbed dose and concentration of the monomer. The chemical modification of the polymerized product into the sulfonated form of the grafted biopolymer was carried out by using sodium sulfite solution. The modification of the biopolymer at various stages was analyzed by Fourier transform infrared (FTIR) spectroscopy and X-ray diffraction (XRD) techniques. By performing scanning electron microscopy (SEM), the morphological changes of the prepared biopolymer were analyzed. The temperature stability of the synthesized material was assessed by the thermogravimetric analysis (TGA) technique. The prepared sulfonated biosorbent was used in the batch adsorption study for the uptake of copper. We examined a variety of variables, including pH, adsorbent dosage, and time. The adsorption kinetics were studied using pseudo-first-order (PFO) and pseudo-second-order (PSO) models. Adsorption isotherms and thermodynamic parameters were also applied to study the adsorption capacity of the biosorbent. The maximum copper adsorption capacity was found to be 198 mg g-1 from the Langmuir isotherm. Copper adsorption followed PSO kinetics (R2 = 0.999). This inexpensive and eco-friendly biosorbent removed 96% of copper ions from the solution.

Involvement of the Opioidergic Mechanism in the Analgesic Potential of a Novel Indazolone Derivative: Efficacy in the Management of Pain, Neuropathy, and Inflammation Using In Vivo and In Silico Approaches.

Indazolones possess interesting pharmacological activities. The search for indazole and indazolone-containing nuclei as drugs is an important research area of medicinal chemistry. The current work aims to evaluate a novel indazolone derivative against in vivo and in silico targets of pain, neuropathy, and inflammation. An indazolone derivative (ID) was synthesized and characterized using advanced spectroscopic techniques. Well-established animal models of abdominal constriction, hot plate, tail immersion, carrageenan paw edema, and Brewer's yeast-induced pyrexia were employed for evaluating the potential of the ID at different doses (20-60 mg kg-1). Nonselective GABA antagonists, opioid antagonist naloxone (NLX) and pentylenetetrazole (PTZ), were employed to assess the potential role of GABAergic and opioidergic processes. The antineuropathic potential of the drug was evaluated using a vincristine-induced neuropathic pain model. In silico studies were performed to assess any possible interactions of the ID with pain target sites like cyclooxygenases (COX-I/II), GABAA, and opioid receptors. This study revealed that the selected ID (doses of 20-60 mg kg-1) efficiently hampered chemically and thermally induced nociceptive responses, producing significant anti-inflammatory and antipyretic effects. These effects produced by the ID were dose-dependent (i.e., 20-60 mg kg-1 and p range of 0.001-0.01) and significant in comparison to standards (p < 0.001). Antagonistic studies with NLX (1.0 mg kg-1) and PTZ (15.0 mg kg-1) revealed the involvement of the opioidergic mechanism rather than the GABAergic mechanism. The ID showed promising anti-static allodynia effects as well. In silico studies revealed preferential binding interactions of the ID with cyclooxygenases (COX-I/II), GABAA, and opioid receptors. According to the results of the current investigation, the ID may serve in the future as a therapeutic agent for the treatment of pyrexia, chemotherapy-induced neuropathic pain, and nociceptive inflammatory pain.

Biologically Potent Benzimidazole-Based-Substituted Benzaldehyde Derivatives as Potent Inhibitors for Alzheimer's Disease along with Molecular Docking Study.

Twenty-one analogs were synthesized based on benzimidazole, incorporating a substituted benzaldehyde moiety (1-21). These were then screened for their acetylcholinesterase and butyrylcholinesterase inhibition profiles. All the derivatives except 13, 14, and 20 showed various inhibitory potentials, ranging from IC50 values of 0.050 ± 0.001 µM to 25.30 ± 0.40 µM against acetylcholinesterase, and 0.080 ± 0.001 µM to 25.80 ± 0.40 µM against butyrylcholinesterase, when compared with the standard drug donepezil (0.016 ± 0.12 µM and 0.30 ± 0.010 µM, against acetylcholinesterase and butyrylcholinesterase, respectively). Compound 3 in both cases was found to be the most potent compound due to the presence of chloro groups at the 3 and 4 positions of the phenyl ring. A structure-activity relationship study was performed for all the analogs except 13, 14, and 20, further, molecular dynamics simulations were performed for the top two compounds as well as the reference compound in a complex with acetylcholinesterase and butyrylcholinesterase. The molecular dynamics simulation analysis revealed that compound 3 formed the most stable complex with both acetylcholinesterase and butyrylcholinesterase, followed by compound 10. As compared to the standard inhibitor donepezil both compounds revealed greater stabilities and higher binding affinities for both acetylcholinesterase and butyrylcholinesterase.

Hydrophobic ammonium based ionic liquids for efficient extraction of textile dyes from aqueous media: Extraction study and antibacterial evaluation.

Alizarin red S (ARS) extraction from aqueous medium was carried out using hydrophobic ionic liquids (ILs) containing trioctylammonium cation paired with 4-tert-butylbenzoate ([TOA][Butbenz] (IL1), 4-phenylbutanoate ([TOA][PheBut] (IL2), 3-4-dimethylbenzoate ([TOA][DMbenz] (IL3), naphthoate, ([TOA][Naph]) (IL4), salicylate ([TOA][Sali]) (IL5) and nonanedioate ([TOA]2[Nona]) (IL6). The findings demonstrated that all of the tested ILs were efficient for extracting ARS, however, [TOA]2[Nona] was more effective than others. For the extraction of ARS from the aqueous phase, the effects of various parameters including the initial pH of the dye solution, contact time, ILs to dye volume ratio (VIL:VW), dye concentration, temperature, and salt effect were investigated. The spontaneity of the liquid-liquid extraction of ARS from the aqueous phase to the IL phase was confirmed by thermodynamic parameters. More than 90% of the ARS was extracted from the aqueous phase to the IL phase throughout all experiments. Interaction of selected IL with dyes were confirmed using FTIR analysis. The standard bacterial strains of Escherichia coli (E. coli) ATCC BAA-2471 (gram negative) and Methicillin-resistant Staphylococcus (MRSA) ATCC 43300 (gram positive) were used for evaluating antibacterial activity. The lower dose (250 ppm), the ILs1, 2, 3, 4, 5, and 6 inhibited 0.40, 1.50, 6.50, 1.50, 2.50, and 0.50 mm growth of E. coli, and 4.0, 2.0, 16.50, 0.40, 5.0, and 3.50 mm growth of MRSA, respectively. The experimental findings confirmed that the present ILs can be utilized as an effective solvent for ARS and other dyes extraction from aqueous media.

Synthesis of activated carbon-surfactant modified montmorillonite clay-alginate composite membrane for methylene blue adsorption.

In this research work, a novel composite membrane was synthesized from activated carbon (AC) derived from sesban, sodium benzyl dodycyel sulphate (SBDS) treated montmorillonite (MMT) clay and alginate (alg) for the adsorption of methylene-blue (MB) dye. The AC-MMT-alg composite membranes were characterized using analytical characterizations such as FTIR, SEM, EDX and TGA analysis. Several important factors like initial solution pH, contact time, membrane dose, MB concentrations and temperature effect on the adsorption efficiency of membrane were investigated. MB dye adsorption on the synthesized membrane was explained well by pseudo second order equation. Isotherm study showed that MB adsorption data followed Langmuir adsorption isotherm model. The adsorption capacity of membrane for MB was 1429 mg/g from aqueous solution. Thermodynamic study confirmed endothermic and spontaneous MB adsorption on the adsorbent. The mechanistic path way indicated that electrostatic forces were involved in this adsorption process. The synthesized membrane proved an efficient adsorbent for MB adsorption from aqueous media.

Synthesis and Characterization of Functionalized Nanosilica for Zinc Ion Mitigation; Experimental and Computational Investigations.

Zinc is an essential trace metal and its concentration above 4ppm reduces the aesthetic value of water. This study explores the possibility of using functionalized nanohybrids as Zn(II) ion scavengers from aqueous solution. Functionalized nanohybrids were synthesized by the attachment of thiosemicarbazide to silica. The material was characterized by TGA, SEM, FTIR, EDX, and BET analysis, which revealed ligand bonding to silica. The functionalized silica was employed as Zn(II) ion extractant in batch experiments and removed about 94.5% of the Zn(II) ions at pH 7, near zero point charge (6.5) in 30 min. Kinetics investigations revealed that zinc adsorption follows an intra particle diffusion mechanism and first-order kinetics (K = 0.1020 min-1). The data were fitted to Freundlich, Dubinin-Radushkevich, and Langmuir models and useful ion exchange parameters were determined. The impact of co-existing ions on Zn(II) ion sequestration was also studied and it was found that the adsorbent can be used for selective removal of zinc with various ions in the matrix. Quantum mechanical investigations revealed that the Zn(II) ion adsorption on ZnBS1 is more favorable, having higher binding energy (BE) (-178.1 kcal/mol) and ∆H (-169.8), and making tridentate complex with the N and S sites of the chelating ligand. The negative ∆G and BE values suggest highly spontaneous Zn(II) adsorption on the modified silica even at low temperatures.

Synthesis of Benzimidazole-Based Analogs as Anti Alzheimer's Disease Compounds and Their Molecular Docking Studies.

We synthesized 10 analogs of benzimidazole-based thiosemicarbazide 1 (a-j) and 13 benzimidazole-based Schiff bases 2 (a-m), and characterized by various spectroscopic techniques and evaluated in vitro for acetylcholinesterase (AchE) and butyrylcholinesterase (BchE) inhibition activities. All the synthesized analogs showed varying degrees of acetylcholinesterase and butyrylcholinesterase inhibitory potentials in comparison to the standard drug (IC50 = 0.016 and 4.5 µM. Amongst these analogs 1 (a-j), compounds 1b, 1c, and 1g having IC50 values 1.30, 0.60, and 2.40 µM, respectively, showed good acetylcholinesterase inhibition when compared with the standard. These compounds also showed moderate butyrylcholinesterase inhibition having IC50 values of 2.40, 1.50, and 2.40 µM, respectively. The rest of the compounds of this series also showed moderate to weak inhibition. While amongst the second series of analogs 2 (a-m), compounds 2c, 2e, and 2h having IC50 values of 1.50, 0.60, and 0.90 µM, respectively, showed moderate acetylcholinesterase inhibition when compared to donepezil. Structure Aactivity Relation of both synthesized series has been carried out. The binding interactions between the synthesized analogs and the enzymes were identified through molecular docking simulations.